We offer a wide variety of standard and customized car parking solutions. The solutions are in-built with all the safety features, and each parking solution goes through a series of stringent quality measures to ensure the only quality product reaches out to customers.
We also offer maintenance and spares to ensure that the products remain in good condition and have a longer shelf life.
In today’s times, where space is a huge constraint, automated car parking solutions are ideal products for optimum utilization of parking spaces.
Car Stacker
System Type : Dependent System
Car Stack Parking is a Parking System providing dependent parking Spaces for two cars one vehicle below and one vehicle above. Also available in 3 level Parking where one vehicle below and two vehicles above. The parking system is operated with a key switch on the operator box mounted in front.
In this parking system the access to all parking spaces is horizontal. The vehicle parked below must be removed first before the platform is lowered.
To facilitate proper parking of the vehicle the upper parking space is equipped with a Wheel-stop. This Wheel-stop should be adjusted in accordance with the operating instructions.
Puzzle Parking System
System Type : Independent System
Puzzle Parking System is a fully automated system featuring a combination of pallets that enable horizontal and vertical movement of parking spots and retrieve cars.
Entrance-level pallets move sideways and upper-level pallets move vertically, with always one pallet less at the entrance and middle levels.
To collect a car parked on the upper level, the pallets at the entrance level will first move to one side to provide an empty space into which the required pallet is lowered or raised
Completely equipped with multiple sensors.
A fully automatic independent system that can easily be configured and customized to fit any property.
Tower Parking Solutions
System Type : Independent
Tower Parking System is Fork and Tray type (Non-Pallets type) instead of Pallet for car transfer in order to reduce the in-out time. Completely equipped with multiple sensors and multiple safety devices.
It can be installed within the RCC building structure or attached to the existing structure or to be a freestanding erection.
Tower Parking System has a capacity of between 12 and 70 Car parking spaces depending on the height of the unit and location.
Rotary Parking Systems
System Type : Independent
Rotary Parking is specifically designed to accommodate multiple cars in the horizontal space of two. The structure can accommodate cars depending upon the requirement of the user and can be efficiently put to use in many crunched areas.
It is simple to operate with the Driver parking and leaving the vehicle in the system at ground level. Once the driver leaves the incorporated safety zone the vehicle is automatically parked by the system rotating to lift the parked car away from the bottom central position. This leaves an empty parking space available at ground level, for the next car to be parked on.
The parked car is easily retrieved by pushing the button for the relevant position number the car is parked on. This causes the required car to rotate clockwise or anticlockwise down to ground level ready for the driver to enter the safety zone and reverse the car out of the system.